Glory Blowers

Filter backwash blowers
High efficiency and durability and also reduces noise, pulsation, and horsepower levels over conventional blowers

Specifications

• Type: Air cooled
• Capacity: 10 M3/Hr to 12,000 M3/Hr
• Pressure:0.1kg/cm2 to 1.0 kg/cm2
• Drive: Direct or V-Belt
• Horsepower: Up to 250 hp

Square Tube Settlers

• Type: Tube settler media
• Tube size: Square tube type –All layers Parallel arrangement
• Tube thickness: 1.1 to 1.2 mm
• Colour: Black
• Settling Area: 14m2 / m3
• Min weight: : 85 kg/m3
• Temp withstanding: 57 Deg’C
• Matl of tube: Unpalstisized Poly Vinyl Chloride, UV stabilizer (TiO2)
• Media height: 950 mm (+/- 15mm)
• Slanting height/Tb length: 1100 mm (+/- 20mm)
• Area of inclination: 55 to 60 degree
• No tubes : Min 60, however it changes according to your tank size, no of supporting beams and bottom structure.
•Size of Blocks : Length & width of the block will be decided based on the position of supporting structure in your tank

Advantages of Square Tube settlers:

• Min bottom support required, so the support structure cost reduced
• Pipes are pasted to each other, the bonding surface is the size of the pipe (55mm)
• Except the outer pipe, all other pipes are glued from all sides, this results in a robust structure.
• Supplied in block forms, so individual blocks of square tube settlers can be removed and easy for maintenance.
• Ready to install blocks supplied, hence no site assembly is required.

Chevron Tube settler

Chevron Tube Settler Media Specifications

PLAN SETTLING AREA OF MEDIA 60° Slope: 55° Slope:	11.0 m2/m3 13.0 m2/m3
CROSS SECTIONAL AREA	120 mm X 44 mm
SHAPE	HEXAGONAL CHEVRON
MOC OF MEDIA	PVC
THICKNESS	1.1 mm (+/- 0.1 mm)
HYDRAULIC RADIUS	1.5 cm
FITTING ARRANGEMENT	TONGUE & GROOVE
MAX CONTINUOUS OPERATING TEMPERATURE	550 CELSIUS
COLOUR	BLACK
DISTANCE BETWEEN ADJACENT TUBES HORIZONTAL: VERTICAL:	120.0 mm 44.0 mm
WEIGHT	75.0 kg/m3 (APPROX)/52.0kg/m3
SEPERATOR HEIGHTS 1000 mm	11.0 m2 SETTLING AREA/ m2

Salient features

• Increases capacity of clarifier,Enhances particle agglomeration and growth.
• Enhances suspended solids concentration,Installation is fast and easy.

Self Cleaning Filter

Automatic Self Cleaning Filters and Strainers

The self-cleaning product line includes tubular back-washing and mechanically cleaned technology. The filters improve your product quality by removing oversize contamination from 10 micron to 2500 microns.

Applications: Municipal WTP/ Desalination plant/ Cooling and Recirculation.

SELF CLEANING FILTERS

• Reduce water storage: Allows wide range of flow rate up to 40,000 m3/.hr. Lowest consumption of water for online self-cleaning. Min water rejection, less than 0.7% feed flow rate.
• Complete filtration: Helps in filtering between 10 to 2500 microns
• Effective cleaning: Cleaning of water with improved suction nozzles with nylon bristles
• Smooth operation: Mechanically equipped, no interruption in the flow during the cleaning cycle of water.
• Eliminates: clogging of nozzles
• Intake: Water removal of debris, sand, silt and plastic
• Water: audits at regular intervals to reduce in makeup water for re-circulation and cooling
• Increase: life and flux of membranes and cartridges for better productivity.