Mobile: +91 9840152574
glorytechnology@gmail.com
sales@gloryblowers.in
+91 44 25566086
We offer Twin Lobe and Tri lobe Roots blowers which are compact in size and known for their high efficiency and durability. Our heavy duty blowers are meant for continuous duty which reduces noise, pulsation, and horsepower levels over conventional blowers
Specifications
• Type: Air cooled and water cooled
• Capacity: 10 M3/Hr to 12,000 M3/Hr
• Pressure: 100M BAR to 1000M BAR
• Drive: Direct or V-Belt
• Vacuum: No more than 16 INHgV (Not more than 539 mbar)
• Horsepower: 3hp-350hp
Standard centrifugal fans are designed for impeller diameters up to 1.32 meters and are built for light duty as well as heavy duty applications. All accessories available with our custom centrifugal fans are also available for standard centrifugal fans.
Specifications
• Air flow (capacity) range : 1700 CMH to 170000 CMH
• Static Pressure Range : 10 mm WC to 150 mm WC
• RPM variation : 300 to 2900
• Inlet/Outlet Velocity : Accurately designed to suit the application and noise levels
• Noise at 1 m distance : Less than 85 DB
We offer an excellent range of Side Channel Blowers i.e, turbine blowers. These are used for applications requiring large volumes of clean, dry air at low pressures and vacuums.
Specifications
• Capacity (m3/hr) : Up to 2500
• Vacuum Range {mbar(g)} : Up to 200
• Pressure Range {mbar(g)} : Up to 550
Provides effective air supply or exhaust through a ducted system requiring high static pressure and it could be connected to a hood & duct system for effective remote exhaust or filtered ventilation air supply system.
• Duct fans in series for tunnel ventilation requiring static pressure up to 7-8” WC.
• Different blades combination for low noise- at higher RPM.
• Being electrically connected- Ready to start.
This is a multi-impeller and multistage centrifugal blower and the number of stages and speed are selected according to the end user’s demand.
• Duct fans in series for tunnel ventilation requiring static pressure up to 7-8” WC.
• Different blades combination for low noise- at higher RPM.
• Being electrically connected- Ready to start.
Specifications
• Air Flow : 80 To 400 cfm
• Vacuum: 650 to 2500 mm WC
• Pressure: 650 to 4000 mm WC
Advantages
• No Fine internal clearance or wearing parts requiring lubrication except Bearing.
• Air delivered is free from oil,vapour,moisture or other contamination.
• Air is completely uniform and free from pulsation.
• Power consumption varies with the volume of Air delivered.
• Dynamically Balanced impellers minimise vibrations.
• Space Efficient design.
• Versatile:Can be used as Blowerfor pressure and as Exhausters for suction
PP FRP Blower is suitable for corrosive and abrasive applications and it is widely used in acid plants, gas washing, Rayon plants, caustic soda plants, pickling plants, Chem & Dyeing plants. Our Product range is 0.5hp to 20hp.
Our Acoustic hood accommodates a blower with complete accessories and motor and it can easily reduce the noise to the tune of 15 to 20dBA and decrease the overall noise level to the acceptable range. It is preassembled and easy to install at site.
